Most Common Roadworthy Problems That Call For Inspections

Roadworthy problems will make inspectors deny you a roadworthy certificate, which means you cannot resell your car. Moreover, a car cannot be re-registered without passing an inspection. Undertaking roadworthy inspections gives the buyer confidence that the car is worth their money. Here are common roadworthy problems which your mechanic can fix to make your car suitable for sale: 

Worn-Out Tyres

Inspectors will not give your car a clean bill of health if the tyres are worn-out. Usually, they will check the minimum tread depth and the general condition of the tyres before issuing the certificate. Tyre inspection is necessary since tyres play a significant role in the driver's safety and other road users. For instance, it is difficult to stop a car on a wet road when the tyres are worn out. 

Thus, changing the tyres can dramatically increase the car's value and enable you to get a roadworthy certificate. Also, keep in mind that old and worn tyres will create the impression of an old car even when the car body is in good shape.

Chipped and Cracked Windscreen 

Modern laminated car windscreens have two layers. Inspectors will not grant a roadworthy certificate if the chips and cracks have penetrated the two layers of the windscreen. They may also check the size of the chips and cracks. If they are too deep and long, the inspectors might deny you the certificate. 

The basis for the roadworthy windscreen inspection is to ensure that the damage does not impair the driver's judgment. You may need a windscreen replacement to boost the car resale value if the damage is too severe. 

Worn and Malfunctioning Brakes 

One of the obvious reasons for inspection rejection is visible wear and distortion on the brake pedals and brake system. The inspection applies to all four brakes. A certificate will also be denied if the wear on brake linings extends down to wear indicators. Additionally, vehicle inspectors will check to ensure that the brakes are properly mounted and fully functional. They also confirm that the emergency brakes function properly during parking and driving.

The primary purpose of the brake inspection is to ensure that the car is safe to drive and stop. Hence, an obvious sign of malfunctioning brakes is considered safety hazard. Therefore, you might want to take your vehicle to an auto service station for your mechanic to inspect and repair the baking system before heading out for roadworthy inspection. 

When the time comes to sell your vehicle, you must do everything possible to get the top dollar from the sale. So, make sure that you check that all the components listed above are in good working order to get a certificate from the roadworthy inspection.


Share